Application difference of bearings for different types of distributing machines

Application difference of bearings for different types of distributing machines

The bearing of the distributor is the mechanical joint of the distributor. To determine whether the rotation of a manual distributor is flexible or not, the bearing of the distributor plays a crucial role.

Distributor bearings can be divided into three main types of bearings, also known as rotary support, assembled in the distributor column between the closure of the rack to play the role of arm rotation and link the rack and stand on the role of the second kind of small bearings also known as the role of secondary rotation elbow joint.

The bearing life of the distributor depends on material selection and technology. For example, the distributor made by Cangzhou Jianhua Concrete Pump Fittings Co., Ltd. is assembled by four sets of bearings.

The main bearings are all made of long-distance and double-grain balls in the shell of Maanshan Iron and Steel Company, which effectively avoids the drawbacks of pulling and transmission failure caused by bearing wear during the use of the distributor and greatly improves the service life of the main bearings. Construction interruption caused by ruptured slurry. Small bearings bear less weight, large bearings to be larger, if the weight of the distributor itself is too large, long-term use of small bearings, then the service life of the distributor will be reduced. Large bearings are used instead.

At present, the use of large bearings in the market is about 500 more expensive than that with small bearings.